Screw set for filter head clamp – Soma 5862042000

This Soma 5862042000 hardware set replaces the fasteners on the compatible filter head clamp. It includes two screws and two square nuts, as shown, for compatible Soma, Tabex, Olympic, Splash, and Hayward models.

Replace the filter clamp hardware

The screws and nuts assemble the clamp that secures the head to the filter tank. This set replaces the corresponding hardware; the condition of the clamp and its fittings should also be checked before reassembly.

Features

• Listed brand: Soma.
• Part number: 5862042000.
• SKU: SOMA5862042000.
• Application: filter head clamp.
• Compatibility: Soma, Tabex, Olympic, Splash, and Hayward models that use this hardware.
• Contents: 2 screws and 2 square nuts.
• Sold as a set.

Confirm the correct hardware set

Compare the screw length and diameter, thread pitch, and nut fittings with those on your current clamp. Compatibility depends on the exact clamp model; it does not automatically apply to all filters from the brands listed.

To confirm your choice, send Piscine Hippocampe the filter model and photos of the clamp and its hardware. Mention SOMA5862042000.

Installing the clamp

Stop the pump, disconnect its power supply, and fully depressurize the filter according to its manual before handling the clamp. Check the condition of the clamp, the contact surfaces, and the positioning of the head gasket.

Install and tighten the hardware according to the filter manufacturer's instructions. Do not force an incompatible thread or reuse a cracked clamp. Check the assembly and seal when restarting the system.

In the box

2 mounting screws and 2 square nuts, as shown. Clamp, filter head, and filter not included.